Command Line Interface Guide

If the system has both a main system chassis or main system and at least one direct attached storage

device, Server Administrator may display a summary that resembles the following example:

SEVERITY

: COMPONENT

Ok : Main System Chassis

Critical

: Storage

Commands For Viewing Logs

Use the omreport system or omreport servermodule command to view the following logs: the alert log,

the command log, and the hardware or ESM log.

NOTE: If the Alert log or Command log displays invalid XML data (such as when XML data generated

for the selection is not well-formed), you must clear the log and resolve the issue. To clear the log,

type: omconfig system alertlog action=clear or omconfig system cmdlog

action=clear

. If you need to retain the log information for future reference, save a copy of the

log before clearing. For more information about clearing logs, see Commands For Clearing Logs.

To view the contents of the alert log, type:

omreport system alertlog

omreport servermodule alertlog

To view the contents of the command log, type:

omreport system cmdlog

omreport servermodule cmdlog

To view the contents of the ESM log, type:

omreport system esmlog

omreport servermodule esmlog

Overall Health Status Of The ESM Log

When you run the omreport system esmlog or omreport servermodule esmlog command, the ESM log is

displayed. The first line of the report reflects the overall health of the system hardware. For example,

Health: OK means that less than 80 percent of the space allotted for the ESM log is occupied by

messages. If 80 percent or more of the allotted space for the ESM log is occupied, the following caution

is displayed:

Health: Non-Critical

If a caution is displayed, resolve all warning and critical severity conditions, and then clear the log.

Omreport System Alertaction Or Omreport Servermodule Alertaction

Use the omreport system alertaction or omreport servermodule alertaction command to view a summary

of alert actions that have been configured for warning and failure events on the system components.