Command Line Interface Guide

NOTE: The omreport chassis pwrmonitoring or omreport mainsystem pwrmonitoring command is

applicable from PowerEdge 10G system onwards that support PMBus and that have hot-swappable

power supplies and not systems that have a fixed, non-redundant power supply installed.

NOTE: Power monitoring requires license to report the details. If the appropriate license is not

installed or has expired, the system does not display the power consumption details of the system.

For more information, see the Dell License Manager Guide at dell.com/openmanagemanuals.

NOTE: To maintain consistency across the commands, the output format of this command and the

subsequent command levels has changed. So, you may have to change the user scripts as

applicable.

An example output reporting power statistics in Watts is as follows:

Power Consumption Information

Power Consumption

Index : 1

Status : Ok

Probe Name : System Board Pwr Consumption

Reading : 539W

Warning Threshold : 994W

Failure Threshold : 1400 W

Amperage

PS1 Current 1 : 1.2 A

Power Headroom

System Instantaneous Headroom : 300 W

System Peak Headroom : 340 W

Power Tracking Statistics

Statistic : Energy consumption

Measurement Start Time : Thu May 28 11:03:20 2011

Measurement Finish Time : Fri May 28 11:05:46 2011

Reading : 5.9 KWH

Statistics : System Peak Power

Measurement Start Time : Mon May 18 16:03:20 2011

Peak Time : Wed May 27 00:23:46 2011

Peak Reading : 630 W

Statistics : System Peak Amperage

Measured Since : Mon May 18 16:03:20 2011

Read Time : Tue May 19 04:06:32 2011