Manualshelf

Command Line Interface Guide

ManualsBrandsDell ManualsMotherboardsOpenManage Server Administrator Version 7.4
21222324252627282930
Parameter Description
Optical Drive Controller Displays whether the optical drive controller is enabled or disabled.
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3, or if it is
disabled.
Parallel port mode Displays the setting associated with the parallel port.
Primary SCSI Displays whether the device is on or off.
RAID on motherboard Displays whether RAID-on-motherboard is detected as a RAID device, a
SCSI device, or if the device is disabled during system boot.
RAID Channel A Displays whether RAID-on-motherboard Channel A is detected as a RAID
device or a SCSI device.
RAID Channel B Displays whether RAID-on-motherboard Channel B is detected as a RAID
device or a SCSI device.
Serial Port 1 Displays whether serial port 1 is mapped to a COM port, COM port 1, COM
port 3, COM1 BMC, BMC Serial, BMC NIC, BMC RAC, or is disabled.
Serial Port 2 Displays whether serial port 2 is mapped to a COM port, COM port 2, COM
port 4, or is disabled.
Speaker Displays whether the speaker is on or off.
USB or USBB Displays whether the USB port is enabled or disabled.
Secondary SCSI Displays whether the device is enabled or disabled.
Serial Communications Displays whether COM port 1 and COM port 2 are off or on with or without
console redirection.
Console Redirection After
Boot
Displays whether console redirection after system reboot is enabled or
disabled.
External Serial Connector Displays whether the external serial connector is mapped to Serial Device
1, Serial Device 2, or a Remote Access Device.
Console Redirection
Failsafe Baud Rate
Displays the setting for console redirection failsafe baud rate.
Serial Address Select Displays port address for the serial devices.
BIOS Setup Groups On PowerEdge yx2x Systems
The following table lists the available groups of the BIOS setup parameters on PowerEdge yx2x systems.
NOTE: Based on the hardware configuration, the attributes may vary in a specific group.
Table 6. BIOS Setup Groups On PowerEdge yx2x Systems
Group Description
BIOS Boot Settings Controls the system boot settings when bootmode is set to bios.
Boot Settings Controls the system boot settings when bootmode is set to bios.
29