Manualshelf

Command Line Interface Guide

ManualsBrandsDell ManualsMotherboardsOpenManage Server Administrator Version 7.4
21222324252627282930
Parameter Description
Dual NIC (1/2) Displays whether NIC 1 and NIC 2 with PXE/iSCSI is enabled or disabled.
Dual NIC (3/4) Displays whether NIC 3 and NIC 4 with PXE/iSCSI is enabled or disabled.
NIC 1 Displays whether the first NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 2 Displays whether the second NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
Trusted Cryptographic
Module (TCM)
Displays whether TCM is on or off.
Trusted Platform Module
(TPM) Security
Displays whether TPM is off, on with pre-boot measurements, or on
without pre-boot measurements.
Internal USB Port (number) Displays whether the internal USB is enabled or disabled.
NOTE: Server Administrator may not display the USB sequence
number if there is only one USB port on the system.
Operating System
Watchdog Timer
Displays whether the operating system watchdog timer is enabled or
disabled.
HT Assist Displays the status of the probe filter chipset option.
Internal SD Card Displays whether the internal SD card is enabled or disabled.
Bezel Displays whether the bezel removal intrusion check during system reboot
is enabled or disabled.
Console Redirection Displays whether the BIOS screen is redirected over a particular serial port
or if it is turned off.
Diskette Displays whether the diskette is disabled, auto enabled, or read-only.
Demand Based Power
Management (DBS)
Displays whether DBS is enabled or disabled on the system.
Embedded Hypervisor Displays whether the embedded hypervisor is enabled or disabled.
IDE Displays whether the drive is enabled or disabled.
IDE Primary Drive 0 Displays whether the device is automatically detected and enabled or if the
device is disabled.
IDE Primary Drive 1 Displays whether the device is automatically detected and enabled or if the
device is disabled.
Intrusion Displays whether the intrusion check is enabled or disabled during system
boot.
Mouse Displays whether the mouse is enabled or disabled.
28