Command Line Interface Guide

NOTE: To maintain consistency across the commands, the output format of this command has

changed. Change the user scripts as applicable.

To view the BIOS Setup parameters in short form, type:

omreport chassis biossetup display=shortnames

To view all available boot devices, alias names, and boot order sequences, type:

omreport chassis biossetup attribute=bootorder

NOTE: The bootorder attribute is applicable only on systems prior to 12G. To list the device boot

order, type

omreport chassis biossetup and serach the list under BIOS Boot Settings or UEFI

Boot Settings

depending on the BIOS boot setting.

NOTE: On Linux systems, user or user groups upgraded to administrator or administrator groups

cannot view the boot order sequence.

BIOS Setup Parameters On Systems Prior To PowerEdge 12G Systems

The following table displays the available BIOS setup parameters on systems prior to PowerEdge 12G

systems.

NOTE: All the BIOS Setup parameters are not displayed. Only those BIOS setup properties

configured during system boot are displayed.

Table 5. BIOS Setup Parameters On Systems Prior To Dell PowerEdge 12G Systems

Parameter Description

Bootsequence Displays the device used to boot the system.

Numlock Displays whether the keypad is used as number keys.

Embedded Video

Controller

Displays whether the Embedded Video Controller option is enabled or

disabled.

Boot Mode Displays whether the boot mode is configured to BIOS or Unified

Extensible Firmware Interface (UEFI).

Processor C1-E Displays the Processor C1-E status.

CPU Execute Disable Displays whether the Execute Disable (XD) option is enabled or disabled.

Processor C State Control Displays whether the Processor C State Control option is enabled or

disabled.

Processor CMP Displays the number of cores enabled per processor.

User accessible USB Ports Displays whether the user-accessible USB port is enabled or disabled.

CPU Virtualization

Technology

Displays the additional hardware capabilities provided by Virtualization

Technology.

AC Power Recovery Mode Displays the system state when input power is restored after an outage.

Embedded SATA Controller Displays whether the embedded SATA controller is set to ATA mode, RAID

mode, or is disabled.

SATA Port 0 Displays the state of SATA port 0.

SATA Port 1 Displays the state of SATA port 1.