Command Line Interface Guide

Command
Level 1
Command Level
2
Command
Level 3
User
Privilege
Required
Use
Nonmasking Interrupt (NMI) button (if
present on the system), are enabled or
disabled. It also displays the front panel
encryption access information and the
front panel LCD information.
fru U, P, A Displays the Field Replaceable Unit (FRU)
information.
hwperforman
ce
U, P, A Displays the status and cause for the
system’s performance degradation.
info U, P, A Displays a status summary for main system
chassis components.
intrusion U, P, A Displays the status of the system’s
intrusion sensor(s).
leds U, P, A Displays the properties you have set for
light-emitting diodes to flash under various
alert conditions.
memory U, P, A Displays properties of the system's
memory arrays.
nics U, P, A Displays the NIC and Team interface
properties.
ports U, P, A Displays the properties for the system’s
parallel and serial ports, such as I/O
address, IRQ level, connector type, and
maximum speed.
processors U, P, A Displays properties of the system’s
processors, including speed, manufacturer,
and processor family.
pwrmanagem
ent
U, P, A Displays power inventory details such as
system idle power, system maximum
potential power, and power budget
information.
pwrmonitorin
g
U, P, A Displays properties of power consumption.
pwrsupplies U, P, A Displays the properties of power supplies.
remoteaccess U, P, A Displays general information on remote
access.
slots U, P, A Displays the properties of the system’s
expansion slots and other slot types.
temps U, P, A Displays the status and thresholds for the
system temperature sensors.
21