Command Line Interface Guide

Example to Unblinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=unblink controller=1
cachecade=4
Omconfig Delete Cachecade
Description Deletes a cachecade.
Syntax
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id, where id is the controller ID and the
cachecade ID as reported by the omreport command. To obtain these values,
type omreport storage controller to display the controller IDs and then
type
omreport storage cachecade controller=ID to display the IDs for
the cachecades of the controller.
In some circumstances, you may receive a warning message. You can override
this warning by using the force=yes parameter. In this case, the syntax is as
follows:
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id force=yes
Example to Delete cachecade 4 on controller 1.
Example
omconfig storage cachecade action=deletecachecade
controller=1 cachecade=4
Omconfig Resize Cachecade
Description Resizes a cachecade by adding or removing physical disks.
Syntax
omconfig storage cachecade action=resize controller=id
cachecade=id pdisk=<PDISKID>, where id is the controller ID and the
cachecade ID as reported by the omreport command. To obtain these values,
type omreport storage controller to display the controller IDs and then
type
omreport storage cachecade controller=ID to display the IDs for
the cachecades of the controller.
Example to Resize cachecade 4, use physical disks 0 through 3 on connector 0 of controller
1.
Example for SAS
controllers
omconfig storage cachecade action=resize controller=1
cachecade=4 pdisk= 0:2:0,0:2:1,0:2:2,0:2:3
Example for SCSI,
SATA, and ATA
controllers
omconfig storage cachecade action=resize controller=1
cachecade=4 pdisk=0:0,0:1,0:2,0:3
Omconfig Rename Cachecade
Description Renames a cachecade.
Syntax
omconfig storage cachecade action=rename controller=id
cachecade=id name=<string>, where id is the controller ID and the
cachecade ID as reported by the omreport command. To obtain these values,
type omreport storage controller to display the controller IDs and then
type
omreport storage cachecade controller=ID to display the IDs for
the cachecades of the controller.
Example to Rename cachecade 4 on controller 1 to cc4.
188