Command Line Interface Guide

Omconfig Import Foreign Configuration
Descriptio
n
Imports all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importforeignconfig controller=id,
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.0.x.
Example
to
Import foreign configurations on controller 1.
Example
omconfig storage controller action= importforeignconfig controller=1
Omconfig Import Or Recover Foreign Configuration
Descriptio
n
Imports and recovers all virtual disks that reside on physical disks newly attached to the
controller.
Syntax
omconfig storage controller action= importrecoverforeignconfig
controller=id, where id is the controller ID as reported by the omreport storage
controller command.
NOTE: This command is supported only in firmware version 5.1.1.
Example
to
Import foreign configurations on controller 1.
Example
omconfig storage controller action= importrecoverforeignconfig
controller=1
Omconfig Clear Foreign Configuration
Descriptio
n
Clears or deletes all virtual disks that reside on physical disks newly attached to the
controller.
Syntax omconfig storage controller action= clearforeignconfig controller=id,
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.0.x.
Example
to
Clear foreign configurations on controller 1.
Example
omconfig storage controller action= clearforeignconfig controller=1
Omconfig Physical Disk Power Management
Descriptio
n
Manages the power of physical disks in a controller by spinning down hot spares,
configured drives, and unconfigured drives.
Syntax
omconfig storage controller action= setpdiskpwrmanagement
spindownunconfigureddrives= <enabled | disabled>
spindownhotspares=<enabled | disabled>
spindownconfigureddrives=<enabled | disabled> idlec=<enabled |
disabled> spindowntimeinterval=<30 to 1440>(minutes)
177