Command Line Interface Guide

rebuildrate=<rate>
clearredundantpath=clear
abortcheckconsistencyonerror=<enabled |
disabled> loadbalance=<auto | disabled>
allowrevertiblehotspareandreplacemember
=<enabled | disabled>
autoreplacememberonpredictivefailure=
<enabled | disabled>
persistenthotspare=<enabled | disabled>
Example to Enable allow revertible hot spare and replace
member operation.
Example
omconfig storage controller action=
setchangecontrollerproperties
allowrevertiblehotspare
andreplacemember=enabled controller=1
Omconfig Discard Preserved Cache
Descriptio
n
Discards the preserved cache on the controller.
NOTE: To check if the controller has a preserved cache, type omreport storage
controller controller=id. If the system displays Preserved Cache=yes, it
indicates the presence of the preserved cache.
Syntax
omconfig storage controller action= discardpreservedcache
controller=id force=enabled | disabled
If you set force=enabled, the cache is discarded irrespective of whether the controller
detects a foreign or an offline virtual disk.
Example
to
Discard the preserved cache.
Example
omconfig storage controller action= discardpreservedcache
controller=1 force=enabled
CAUTION: Discarding the preserved cache can result in data loss. It is recommended
that you run this command using the force=disabled option.
NOTE: If a foreign configuration is detected, then the preceding command using
force=disabled option fails. To avoid data loss, import the foreign configuration
and flush the preserved cache to disk. To discard preserved cache forcefully, either
clear the foreign configuration and run the proceeding command, or run the
proceeding command using force=enabled option.
Omconfig Create Encryption Key
Descriptio
n
Creates the encryption key for the controller.
Syntax
omconfig storage controller action= createsecuritykey controller=id
keyid=<keyid string> passphrase=<passphrase string>[escrow= yes]
[filepath=<Absolute path to the escrow file>]
Example
to
Create the encryption key for the controller.
Example
omconfig storage controller action= createsecuritykey controller=1
keyid=Dell_123 passphrase=Dell_123 escrow=yes filepath= C:/escrow.xml
174