Command Line Interface Guide

Omconfig Online Physical Disk
Description
Brings an offline physical disk back online.
Syntax
omconfig storage pdisk action=online
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Bring physical disk 3 on connector 0 of controller 1
back online. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:2:30
Omconfig Assign Global Hot Spare
Description
Assigns a physical disk as a global hot spare.
Syntax
omconfig storage pdisk
action=assignglobalhotspare
controller=id pdisk=<PDISKID>
assign=yes, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Assign physical disk 3 on connector 0 of controller
1 as a global hot spare. On a SAS controller, the
physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=assignglobalhotspare
controller=1 pdisk=0:3 assign=yes
Example for SAS controllers
omconfig storage pdisk
action=assignglobalhotspare
controller=1 pdisk=0:2:3 assign=yes
Omconfig Rebuild Physical Disk
Description Rebuilds a failed physical disk. Rebuilding a disk
may take several hours. If you need to cancel the
rebuild, use the Cancel Rebuild task. For more
148