Command Line Interface Guide

8
Omconfig Storage Commands
The omconfig commands allows you to configure physical disks, virtual disks, controllers, enclosures,
batteries, global information, connectors, and cachecades.
To see a list of valid commands for omconfig storage, type:
omconfig storage -?
The following table provides the omconfig storage command syntax:
Table 84. Omconfig Storage Help
Command
Level 1
Command
Level 2
Command
Level 3
Use
omconfig
storage Sets the storage component properties for which
omconfig commands are available.
pdisk Displays the list of omconfig storage pdisk parameters
for configuring physical disks.
vdisk Displays the list of omconfig storage vdisk parameters
for configuring virtual disks.
controller Displays a list of the omconfig storage controller
parameters for configuring controllers.
enclosure Displays a list of the omconfig storage controller
parameters for configuring enclosures.
battery Displays a list of the omconfig storage battery
parameters for configuring batteries.
globalinfo Displays a list of the omconfig storage globalinfo
parameters for configuring global storage properties.
connector Displays a list of the omreport storage connector
parameters for configuring connectors.
cachecade Displays a list of the omconfig storage cachecade
parameters for configuring cachecades.
fluidcache Displays the fluid cache properties and the associated
fluid cache disks.
fluidcachepool Displays the fluid cache pool properties.
partition Displays the partition details of the specified controller
and virtual disk.
fluidcachedisk Displays the fluid cache disk properties.
143