Command Line Interface Guide

Table 78. omreport PCIe SSD Command
Required Command Levels (1, 2,
3) And name=value pair
Optional name=value pairs Use
omreport storage pciessd
Displays the properties of the
PCIe SSD subsystem.
subsystem=id Displays the properties of the
specified PCIe subsystem.
Omreport Fluid Cache Status
The following table describes the syntax for the omreport fluidcache commands.
Table 79. omreport Fluid Cache Command
Required Command Levels (1, 2, 3) And
name=value pair
Use
omreport storage fluidcache
Displays fluid cache properties and the associated
fluid cache disks.
Omreport Fluid Cache Pool Status
The following table describes the syntax for the omreport fluidcachepool commands.
Table 80. omreport Fluid Cache Pool Command
Required Command Levels (1, 2, 3) And
name=value pair
Use
omreport storage fluidcachepool
Displays the properties of the fluid cache pool.
omreport Partition Status
The following table describes the syntax for the omreport partition commands.
Table 81. omreport Partition Command
Required Command Levels (1, 2,
3) And name=value pair
Optional name=value pairs Use
omreport storage partition
Displays the partition details of
the specified virtual disk.
controller=id vdisk=id, where id
is the controller number and the
virtual disk number. For example:
controller=0 vdisk=1.
Displays all the partitions in the
specified virtual disk on the
controller.
Omreport Fluid Cache Disk Status
The following table describes the syntax for the omreport fluidcachedisk commands.
141