Command Line Interface Guide

Required Command Levels (1,
2, 3)
Optional name=value pairs Use
OpenManage Server Administrator
Storage Management User’s Guide
at dell.com/support/manuals.
Omreport Connector Status
The following table describes the syntax for the omreport Connector commands
Table 76. Omreport Connector Commands
Required Command Levels (1, 2,
3)
Optional name=value pairs Use
omreport storage connector
Displays all connectors present on all
controllers on the system.
NOTE: This command works
only when the controller ID is
specified.
controller=id, where id is the
controller number. For
example: controller=0
Displays the connectors on the
specified controller.
controller=id connector=id,
where id is the connector
number. For example,
connector=0
Displays the specified connector.
NOTE: When the connectors are
connected to the enclosure in
redundant path mode, the Name
of the connector is displayed as
Logical Connector.
Omreport Cachecade Status
The following table describes the syntax for the omreport Cachecade commands
Table 77. Omreport Cachecade Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage
cachecade
Displays property information for all
cachecades on all controllers.
controller=id, where id is the
controller number. For example,
controller=0.
Displays all cachecades on the
specified controller.
controller=id cachecade=id, where
id is the controller number and the
cachecade number. For example,
controller=0 cachecade=1.
Displays the specified cachecade on
the controller.
Omreport PCIe SSD Status
The following table describes the syntax for the omreport pciessd commands.
140