Command Line Interface Guide

Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
is the controller number and
<ENCLOSUREID>is the enclosure ID.
Example for SCSI controllers:
controller=0 enclosure=2. Example for
SAS controllers: controller=0
enclosure=1:2.
Omreport Temperature Probe Status
The following table describes the syntax for the omreport Probe commands
Table 69. Omreport Temperature Probe Commands
Required Command Levels (1, 2,
3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the
system.
controller=id
enclosure=<ENCLOSUREID>
info=temps where id is the
controller number and
<ENCLOSUREID> is the enclosure
ID. Example for SCSI controllers:
controller=0 enclosure=2
info=temps. Example for SAS
controllers: controller=0
enclosure=1:2 info=temps
Displays the temperature probes
for the specified enclosure.
controller=id
enclosure=<ENCLOSUREID>
info=temps index=n where id is
the controller number and
<ENCLOSUREID> is the enclosure
number and n is the number of a
temperature probe. For example:
controller=0 enclosure=2
info=temps index=1
Displays the temperature probes
for the specified enclosure.
Omreport Fan Status
The following table describes the syntax for the omreport Fan commands
136