Command Line Interface Guide

Example Command For Adding Lease Information
To provide a value for a lease parameter, type a command of the form: omconfig system assetinfo
info=lease <name=value pair 2> or omconfig servermodule assetinfo info=lease <name=value pair 2>.
For example, type:
omconfig system assetinfo info=lease value=4500
or
omconfig servermodule assetinfo info=lease value=4500
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfocommand
at the same time, as long as all the parameters for name=value pair 2 belong to the same name=value
pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding Maintenance Information
Maintenance refers to activities required to keep the system in good working order. The following table
displays the valid parameters for adding maintenance information.
Table 55. Valid Parameters Of omconfig system assetinfo info=maintenance Or omconfig servermodule
assetinfo info=maintenance
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair
2
Description
omconfig system or
servermodule
assetinfo info=mainten
ance
enddate=<enddate
>
Date the extended
warranty agreement
ends.
provider=<provider
>
Business entity
providing the
maintenance service.
startdate=<startdat
e>
Date the
maintenance begins.
restrictions=<string
>
Activities not covered
by the maintenance
contract.
Example Command For Adding Maintenance Information
To provide a value for a maintenance parameter, type a command of the form: omconfig system
assetinfo info=maintenance <name=value pair 2> or omconfig system assetinfo info=maintenance
<name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance startdate=012504
or
omconfig servermodule assetinfo info=maintenance startdate=012504
122