Command Line Interface Guide

Example Command For Adding Extended Warranty Information
To provide a value for an extended warranty parameter, type a command of the form: omconfig system
assetinfo info=extwarranty <name=value pair 2> or omconfig servermodule assetinfo info=extwarranty
<name=value pair 2>. For example, type:
omconfig system assetinfo info=extwarranty enddate=012503
or
omconfig servermodule assetinfo info=extwarranty enddate=012503
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command
at the same time, as long as all the parameters for name=value pair 2 belong to the same name=value
pair 1. For an example, see Example Command For Adding Acquisition Information.
Adding Lease Information
A lease is an agreement to pay for the use of a system for a specified period of time. The lessor retains
ownership of the system. The following table displays the valid parameters for the command.
Table 54. Valid Parameters Of omconfig system assetinfo info=lease Or omconfig servermodule assetinfo
info=lease
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value
Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=leas
e
buyout=<amount> Amount of money paid
to purchase a system
from a lessor.
lessor=<lessor> Business entity that is
leasing the system out.
multischedule=true
| false
Whether cost of
leasing the system is
computed by more
than one rate
schedule.
ratefactor=<factor> Factor used to
calculate the lease
payment.
value=<residual> Fair market value of
the system at the end
of the lease period.
121