Command Line Interface Guide

– VMware vSphere 5.5

• Added support for the following browsers:

– Mozilla Firefox 22 and 23

– Internet Explorer 11

– Safari 6.0

– Google Chrome 27, 28, and 30

• Support for a new license format for Citrix XenServer 6.1.

• Added support for the following Adapter cards:

– Mellanox ConnectX-3 Dual Port 40 GbE QSFP+ Network Adapter

– Mellanox ConnectX-3 Dual Port 10 GbE DA/SFP+ Network Adapter

– Mellanox ConnectX-3 Dual Port 10 GbE KR Blade Mezzanine Card

– Emulex OCe14102-UX-D Dual Port 10Gb SFP+ CNA

– Emulex OCm14102-U3-D Dual Port 10Gb KR Blade Mezz

– Emulex OCm14102-U2-D Dual Port 10Gb KR Blade NDC

– Emulex OCm14104-UX-D Quad Port 10Gb DA/SFP+ Rack NDC

• Added support for Dell PERC 9 controllers (H730P Adapter) on R920 with the following features:

– RAID 10 virtual disk with uneven span.

– Advanced 4K sector hard disk drives.

– T10 Protection Information (PI) for data integrity.

NOTE: For more information, see the Server Administrator Storage Management guide at

dell.com/openmanagemanuals.

• Support for displaying and setting the JRE version. See Omreport Preferences Commands and

Omconfig Preferences Webserver.

• Support for displaying Node Id in System/Server Module Summary information. See omreport system

summary or omreport servermodule summary.

• Support for new values for form factor aligning to iDRAC values. See omreport system summary or

omreport servermodule summary.

• Added support for Software RAID controllers (PERC S110) on systems running the Windows Server

2012 R2 operating system.

• Added support for Non-Volatile Memory Express (NVMe) Peripheral Component Interconnect Express

(PCIe) solid-state drives (SSDs). See the Server Administrator Storage Management guide at dell.com/

openmanagemanuals.

NOTE: Dell PowerEdge Express Flash NVMe PCIe SSD devices support only the Dell-provided

Windows Server 2012 R2 (64–bit) drivers.

• Added support for the following LSI Serial Attached SCSI (SAS) Host Bus Adapters (HBAs) on supported

12G systems:

– LSI SAS 9207–8e

– LSI SAS 9300–8e

– LSI SAS 9206–16e

• Added support for the following Dell PowerEdge servers:

– R920

– R220