Command Line Interface Guide

The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command
at the same time, as long as all of the parameters for name=value pair 2 belong to the same name=value
pair 1. For example, to type more than one parameter value for info=acquisition, use the following
example as a syntax guide:
omconfig system assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John
Smith" expensed=yes costcenter=finance
or
omconfig servermodule assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John
Smith" expensed=yes costcenter=finance
The following message is displayed:
Asset information set successfully.
Adding Depreciation Information
Depreciation is a set of methods for computing the devaluation of the asset over time. For example, the
depreciation of a system that is expected to have a useful life of 5 years is 20 percent. Use the omconfig
system assetinfo info=depreciation or omconfig servermodule assetinfo info=depreciation command to
add details about how the system's depreciation is computed. The following table shows the valid
parameters for the command.
Table 52. Valid Parameters Of omconfig system assetinfo info=depreciation or omconfig servermodule
assetinfo info=depreciation
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description
omconfig system or
servermodule
assetinfo info=depreciati
on
duration=<n> Number of years or
months over which a
system is
depreciated.
method=<text> Steps and
assumptions used to
compute the
system's
depreciation.
percent=<n> Portion of 100 that
an asset is devalued
or depreciated.
unit=months |
years
Unit is months or
years.
119