Command Line Interface Guide

Components And Events Of Platform Events
The following table lists the components and the events for which you can set platform events.
Components are listed in alphabetical order, except that warning events always precede failure events for
a component.
Table 43. Valid Parameters Of Omconfig System Platformevents
Event Name Description
alertsenable=true | false
true: Enables generation of platform event filter alerts.
false: Disables generation of platform event filter alerts.
NOTE: This setting is independent of the individual platform event
filter alert settings. For a platform event filter to generate an alert,
both the individual alert and the global event alert are enabled.
event=batterywarn Sets action or enables or disables alert generation when a battery
device detects that the battery is pending a failure condition.
event=batteryfail Sets action or enables or disables alert generation when a battery
device detects that the battery has failed.
event=discretevolt Sets action or enables or disables alert generation when a discrete
voltage probe detects that the voltage is too low for proper operation.
event=fanfail Sets action or enables or disables alert generation when a fan probe
detects that the fan is running too slow or not at all.
event=hardwarelogfail Enables or disables alert generation when a hardware log detects a
failure value.
event=intrusion Sets action or enables or disables alert generation when a chassis is
opened.
event=powerwarn Sets action or enables or disables alert generation when a power
device probe detects that the power supply, voltage regulator module,
or DC to DC converter is pending a failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor
probe detects that the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power
device probe detects that the power supply, voltage regulator module,
or DC to DC converter has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor
probe detects that the processor is running at less than peak
performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor
probe detects that the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor
probe detects that the processor is absent.
event=redundegrad Sets action or enables or disables alert generation when the system
fans and/or power supplies become inoperative, resulting in less than
full redundancy for that component.
109