Command Line Interface Guide

Example Chassis Intrusion Actions

To clear all alert actions for chassis intrusion, type:

omconfig system alertaction event=intrusion clearall=true

omconfig servermodule alertaction event=intrusion clearall=true

Commands For Clearing Logs

You can use the omconfig system or omconfig servermodule command to clear the following logs: the

alert log, command log, and hardware or ESM log.

To clear the contents of the alert log, type:

omconfig system alertlog action=clear

omconfig servermodule alertlog action=clear

NOTE: Entering an invalid RAC user name may prevent the command log from displaying. Clearing

the command log resolves this condition.

To clear the contents of the command log, type:

omconfig system cmdlog action=clear

omconfig servermodule cmdlog action=clear

To clear the contents of the ESM log, type:

omconfig system esmlog action=clear

omconfig servermodule esmlog action=clear

NOTE: For more information about alert messages, see the Dell OpenManage Server Administrator

Messages Reference Guide at dell.com/support/manuals.

Omconfig System Pedestinations Or Omconfig Servermodule Pedestinations

Use the omconfig system pedestinations or omconfig servermodule pedestinations command to set IP

addresses for alert destinations.

The following table displays the valid parameters for the command.

NOTE: You can either specify the index and IP address as parameters together or you can set only

the community string as a parameter.

NOTE: Index 1 to 4 accepts an IPv4 address and index 5 to 8 accepts an IPv6 address. On 12G

systems with iDRAC7 specific versions, the index can accept IPv4, IPv6, or FQDN.

Table 41. Valid Parameters Of Omconfig System Pedestinations Or Omconfig Servermodule Pedestinations

name=Value Pair Description

destenable=true | false

true: Enables an individual platform event filter destination after a valid IP

address has been set.

107