CIM Reference Guide

RedundancyStatus Provides information on the state
of the redundancy group. Values
for the RedundancyStatus
property are as follows:
0- Unknown
1- Other
2- Fully redundant. Fully
redundant - all of the configured
redundancy is still available.
3 - Degraded redundancy.
Degraded redundancy - that
some failures have been
experienced but some reduced
amount of redundancy is still
available.
4 - Redundancy lost.
Redundancy lost - that a
sufficient number of failures have
occurred so that no redundancy
is available and the next failure
experienced causes overall
failure.
uint16
CIM_ExtraCapacityGroup
The CIM_ExtraCapacityGroup class described in below properties Table applies to systems that have
more capability and components than are required for normal operation, for example, systems that have
extra fans or power supplies.
Table 52. CIM_ExtraCapacityGroup Properties
Class Name:
CIM_ExtraCapacityGroup
Parent Class:
CIM_RedundancyGroup
Property Description Data Type
MinNumberNeeded Specifies the smallest number of
elements that must be
operational in order to have
redundancy. For example, in an N
+1 redundancy relationship, the
MinNumberNeeded property
should be set to N.
uint32
65