CIM Reference Guide

24 - DB-36 54 - IEEE 1394 84 - PC-98-Hireso 114 - Ribbon

25 - RS-232C 55 - HIPPI 85 - PC-H98 115 - GLM

26 - RS-422 56 - HSSDC (6 pins) 86 - PC-98Note 116 - 1x9

27 - RS-423 57 - GBIC 87 - PC-98Full 117 - Mini SG

28 - RS-485 58 - DIN 88 - SSA SCSI 118 - LC

29 - RS-449 59 - Mini-DIN 89 - Circular 119 - HSSC

CIM_Slot

The CIM_Slot class listed in Table below represents connectors into which packages are inserted. For

example, a physical package that is a hard drive can be inserted into a small computer system interface-

single connector attachment (SCSI-SCA) slot. As another example, a card can be inserted into a 16-, 32-,

or 64-bit expansion slot on a host board

Table 12. CIM_Slot Properties

Class Name:class CIM_Slot

Parent Class: CIM_PhysicalConnector

Property Description Data Type

ConnectorType See Connector Type

Values

uint16

SupportsHotPlug Indicates whether the

slot supports hot-plug

adapter cards.

Boolean

MaxDataWidth Indicates the maximum

bus width in bits of

adapter cards that can

be inserted into this slot.

Values for the

MaxDataWidth property

are as follows:

0 - Unknown

1 - Other

8 - bits

16 - bits

32 - bits

64 - bits

128 - bits

uint16

SystemSlotType

Indicates the type of

system slot. Values for