CIM Reference Guide

TotalWidth Indicates the total width,
in bits, of the physical
memory, including
check or error
correction bits. If there
are no error correction
bits, the value in this
property should match
that specified for the
DataWidth property.
uint16
DataWidth Indicates the data width,
in bits, of the physical
memory. A data width of
0 and a total width of 8
would indicate that the
memory is solely used to
provide error correction
bits.
uint16
Speed Indicates the speed of
the physical memory, in
nanoseconds.
uint32
Rank
The Rank values of
DIMM are:
0 - Unknown
1 - Single
2 - Dual
4 - Quad
8 - Octal
16 - Hexa
unit32
SpeedAsString Indicates the accurate
speed of the physical
memory, in string format
(with units).
string
Capacity Indicates the total
capacity of this physical
memory, in bytes.
uint64
BankLabel A string identifying the
physically labeled bank
where the memory is
located, for example,
"Bank 0" or "Bank A."
string
PositionInRow Specifies the position of
the physical memory in
a “row.” For example, if it
takes two 8-bit memory
devices to form a 16-bit
row, then a value of 2
means that this memory
is the second device. 0 is
an invalid value for this
property.
uint32
21