Release Notes

• After a "Reset to Defaults" operation of the Integrated Remote Access Controller, the first
user configuration operation fails if it is a single-user configuration item (such as enabling
or disabling a user or changing user name). Always change a combination of two-user
configuration items (such as enabling or disabling a user and changing user name)
concurrently during your first configuration operation.
• While typing the command "omreport system version -outc <filename>",ensure that you
specify an absolute path name for the output file; else, the output file is empty. For
example, c:\out.txt.
• Typing "omreport system esmlog/alertlog/cmdlog -fmt tbl" command on the CLI can
result in XML parsing errors if the size of the log is very large. Use the GUI or the "omreport
system esmlog/alertlog/cmdlog" CLI command to view the contents of the log.
• For complex "omconfig" CLI commands that contain multiple set commands in one
command line, the CLI may report a success status for the command even if a part of the
command failed. To avoid this issue, run only one command per command line. The
current settings can be confirmed by performing the corresponding "omreport" command.
• Some complex "omconfig" CLI commands that contain multiple set operations have been
modified to avoid the above problem. While executing a CLI command if the message,
"Error! Illegal combination of parameters" is displayed, modify your command into several
simpler commands. Each command should change only one setting.
• When running Server Administrator on a system with a traditional Chinese operating
system, the application pages are displayed in simplified Chinese. To view the Server
Administrator pages in English, go to your browser language preference page and change
the language to English.
• Log files saved from Server Administrator are saved in zip format. It is recommended that
you open this zip file using WinZip. Windows Server 2003 or Windows XP embedded
"Compressed (zipped) Folder" utility is not recommended.
• After configuring BIOS settings on certain systems, a second reboot may be required for
the Server Administrator to display the updated BIOS settings properly.
• If you import an invalid root certificate into Server Administrator, using "Preferences->
General Settings-> Web Server-> X.509 Certificate", and try to log on to the application
after restarting the Web server, a blank page is displayed. To fix this issue, restore your
original "keystore.db" file before importing a valid root certificate. To restore the
"keystore.db" file, use both the basic operating system commands and the Server
Administrator Command Line Instrumentation (CLI).
Perform the following steps from your operating system command line:
o Type: omconfig system webserver action=stop
o Locate the "keystore.db.bak" file. The default path is "C:\program
files\dell\SysMgt\apache-tomcat\conf".
o Copy "keystore.db.bak" to "keystore.db".
o Type: omconfig system webserver action=start
• A temperature drop below a minimum failure threshold does not cause a system reset
even if this alert action is set.
• Clicking the "Back" and "Refresh" buttons on the browser may not display the correct page
with respect to the Server Administrator component tree, tabs, tab menus, or help, as
Server Administrator has been designed with limited functionality to reduce overhead. Full
feature capabilities of the Web browser such as "Back", "Refresh", and "Open in New
Window" may not be supported.
• Selecting the boot sequence under the BIOS "Setup" tab does not re-enable boot devices
that have been disabled in the System Setup Program, earlier.
• The links on the Server Administrator home page may not work after repeated random
clicking. To resolve this issue, refresh the browser by pressing <F5> or click the browser
"Refresh" button.