Software Support

Checking The Temperature Of The Enclosure

Setting The Temperature Probe Values

Enclosure Management Modules (EMMs)

The Enclosure Management Modules (EMMs) that are installed in the enclosure are displayed under the EMMs object

in the tree view. You can select the EMMs object to view the individual EMM modules and their status information.

The enclosure may contain one or more EMMs. The EMM modules monitor components of the enclosure. These

components include:

• Fans

• Power supplies

• Temperature probes

• The insertion or removal of a physical disk

• The LEDs on the enclosure

When the alarm on the enclosure is enabled, the EMM activates the alarm when certain conditions occur. For more

information on enabling the alarm and the conditions that activate the alarm, see Enabling The Enclosure Alarm. For

more information on EMMs, see the enclosure hardware documentation.

All EMM modules in the enclosure should have the same version of firmware. You can view the properties of each

individual EMM module to verify the firmware version.

Verifying The EMM Firmware Version Of The Enclosure

Does my controller support this feature? See Supported Features.

The firmware for the EMM must be at the same level as that of the enclosure. The status of the EMMs is displayed as

degraded if there is a mismatch between the EMM firmware.

To verify the EMM firmware version:

1. In the Server Administrator window, under the system tree, click Storage dashboard.

2. Expand the tree view until the EMMs object is displayed.

3. Select the EMMs object. The firmware version for each EMM is displayed in the Firmware Version column in the

right pane.

For information related to the enclosure’s EMMs, see Enclosure Management Modules (EMMs).

EMM Properties

EMM properties page displays information about:

Table 25. EMM Properties

Property Definition

Status These icons represent the severity or health of the storage

component.

— Normal/OK

— Warning/Non-critical

— Critical/Failure/Error

For more information, see Storage Component Severity.

Name Displays the name of the EMM.