Software Support

NOTE: Global Rescan is not supported on non-RAID controllers. You must reboot the system before Storage

Management can display the configuration changes on non-RAID SCSI controllers.

NOTE: The Global Rescan task updates the configuration changes in the Information/Configuration page. To update

the tree view, click the server name which is displayed above the tree view.

To globally rescan:

1. In the Server Administrator window, under the System tree, expand Storage.

2. Click Information/Configuration on the Storage properties page.

3. Select Global Rescan from the Global Tasks drop-down list box.

4. Click Execute.

Enabling Or Disabling A Smart Thermal Shutdown

By default, the operating system and server turn off when the 220S and 221S enclosures reach a critical temperature of

0 or 50 degrees celsius. You can change the setting to Enable Smart Thermal Shutdown in Global Tasks, to ensure that

only the enclosure and not the operating system or server is turned off when the enclosure reaches a critical

temperature.

If the enclosure has virtual disks that are channel-redundant, then the enclosure can be turned off while redundant data

continues to be available on another channel.

NOTE: Only SCSI controllers support Smart Thermal Shutdown.

To enable or disable thermal shut down:

1. In the Server Administrator window, under the System tree, expand Storage.

2. Click Information/Configuration on the Storage Properties page.

3. From the Global Tasks drop-down list box, select Enable Smart Thermal Shutdown or Disable Smart Thermal

Shutdown

4. Click Execute.