Software Support

Properties Description
• Expired
Fluid Cache Disks
NOTE: When caching is enabled on the virtual disk, partitioning of corresponding back-end virtual disk is not
supported.
For enabling caching on a virtual disk or partition, see Enabling Fluid Cache On Virtual Disks or Enabling Fluid Cache On
Virtual Disk Partitions. For disabling cache on virtual disk or partition, see Disabling Fluid Cache On Virtual Disks or
Disabling Fluid Cache On Virtual Disk Partitions.
Related Links
Fluid Cache Disk Properties
Fluid Cache Disk Properties
The following table lists the properties for Fluid Cache:
Table 7. Fluid Cache Disk Properties
Properties Description
Status
Displays the status of the Fluid Cache. The possible options are:
• OK
• Non-critical
• Critical
Name Displays the name of the Fluid Cache disk.
State
Displays the state of the Fluid Cache. The possible options are:
• Active
• Failed
Tasks Allows you to disable and discard a particular Fluid Cache disk. Click Execute
to complete this operation.
Type
Displays the type of device. The possible values are:
• Virtual Disk
• Partition
Device Name Displays the device map name of the back-end disk.
Size Displays the total size of the Fluid Cache Disk.
Configured Cache Mode
Displays the configured cache mode for the Fluid Cache disk. Possible values
are:
• Write Back
• Write Through
Operational Cache Mode
Displays the operational cache mode for the Fluid Cache disk. If there is a
single PCIe-SSD in the Fluid Cache pool, this property is displayed as Write
48