Software Support

Properties Description
years of the device installation, this failure is covered
under warranty. The drive is in read-only mode if the value
for percent lifetime used is less than 100 percent and that
for write protect progress is equal to 90 percent.
Driver Version Displays the version of the driver that is installed on the
PCIe-SSD sub-system.
NOTE: Storage Management displays Not Applicable
for sub system for which the driver version cannot be
obtained.
Device Life Remaining Displays the warranted wear out level of the PCIe-SSD (in
percentage).
Revision Displays the available firmware version on the PCIe-SSD.
Model Number Displays the Piece Part Identification (PPID) of the PCIe-
SSD.
Capacity Displays the capacity of the device.
Vendor ID Displays the hardware vendor of the device.
Product ID Displays the product ID of the device.
Serial No. Displays the serial number of the device.
Negotiated Speed Displays the speed of data transfer that the device
negotiated during initial communication. The negotiated
speed depends on the speed of the device, the capable
speed of the PCIe extender card, and the current speed of
the PCIe extender card on that connector.
Capable Speed Displays the highest possible speed at which the device
can transfer data.
Fluid Cache Pool Member Indicates whether the PCIe-SSD is a part of a Fluid Cache
pool.
Physical Device Tasks
The physical device tasks for PCIe SSD are as follows:
• Blinking And Unblinking
• Performing A Full Initialization On A PCIe SSD
• Preparing To Remove A PCIe SSD
• Exporting The Log
• Addding PCIe SSDs to Fluid Cache Pool
• Removing PCIe SSDs from Fluid Cache Pool
42