Software Support

Properties Description

Line Interface, see the

Server Administrator Command

Line Interface User's Guide

NOTE: In CLI commands, the PCIe SSD sub-system ID

is displayed as the controller ID.

Name Displays the name of the sub-system.

State Displays the status of the sub-system. Possible values

are:

• Ready — The sub-system is functioning normally.

• Degraded — The sub-system has encountered a

failure and is operating in a degraded state.

• Failed — The sub-system has encountered a

failure and is no longer functioning.

Number of Extender Cards Displays the number of extender cards in the sub-system.

Each extender card can be attached to physical disks or

an enclosure. The extender card must be a PCIe SSD port.

Available Reports Allows you to view the Slot Occupancy report. For more

information, see Available Reports.

PCIe Extender Cards

The PCIe extender card is attached to the backplane of the system and provides PCIe connectivity for up to four PCIe-

SSD devices at the front of the chassis.

NOTE: The PCIe extender card does not have any properties or tasks.

Table 4. PCIe Extender Card

Properties Description

Name Displays the name of the extender card.

State Displays the status of the extender card. Possible values

are:

Ready — The extender card is functioning normally.

Degraded — The extender card has encountered a failure

and is operating in a degraded state.

Failed — The extender card has encountered a failure

and is no longer functioning.