Software Support
16
Protecting Your Virtual Disk With A Hot Spare
When you create a virtual disk using a RAID controller, it enables the system to continue functioning even during a disk
failure. This feature can be enabled by assigning a hot spare to the virtual disk. When a disk fails, the redundant data is
rebuilt onto the hot spare without interrupting system operations.
Related Links
Dedicated Hot Spare Considerations
Dedicated Hot Spare Protection Policy
Understanding Hot Spares
A hot spare is an unused backup physical disk that can be used to rebuild data from a redundant virtual disk. Hot spares
remain in standby mode. When a physical disk that is used in a redundant virtual disk fails, the assigned hot spare is
activated to replace the failed physical disk without interrupting the system or requiring your intervention. If a virtual
disk using the failed physical disk is not redundant, then the data is permanently lost without any method (unless you
have a backup) to restore the data.
Hot spare implementation varies for each controller controller. For more information on hot spares, see:
• Considerations For Hot Spares On PERC S100 And PERC S300 Controllers
• Global Hot Spare Considerations On A SAS 6/iR
The following sections describe procedures for assigning a hot spare:
• Assigning And Unassigning Global Hot Spare
• Assigning And Unassigning Dedicated Hot Spare
Setting Hot Spare Protection Policy
The Hot Spare Protection Policy is supported only on Serial Attached SCSI (SAS) controllers.
The Hot Spare Protection Policy provides you with a higher protection level for the virtual disks by enabling you to
specify the number of dedicated/global hot spares to be assigned to the virtual disks/controller. You can also specify the
severity levels for the protection policy. Storage Management sends alerts when the hot spare protection policy is
violated.
Storage Management does not provide a default policy; however, you can determine the hot spare protection policy
best suited for your environment.
Related Links
Assigning And Unassigning Dedicated Hot Spare
Assigning And Unassigning Global Hot Spare
165