Software Support

To enable Fluid Cache on a virtual disk partition:
1. On the left-hand side of the Storage Management page, expand Storage.
2. Click on the < Controller Name >.
3. Click on Connector.
4. Click on Virtual Disks.
The list of available virtual disk is displayed.
5. Click the Partition link for which you want to enable the cache.
The Partitions of Virtual Disk page is displayed with the list of available virtual disk partitions.
NOTE: The Partition link is available only if the corresponding virtual disk has partitions.
6. From the Tasks drop-down list, select Enable Fluid Cache.
7. Select the Write cache mode. The available options are:
– Write Through
– Write Back
8. Click Apply.
NOTE: This option is available for PERC H710, H710P, and H810 controllers and for Online or degraded virtual
disks.
Disabling Fluid Cache On Virtual Disk Partitions
To disable Fluid Cache on a virtual disk partition:
1. On the left-hand side of the Storage Management page, expand Storage.
The list of available virtual disks is displayed.
2. Click on the < Controller Name >.
3. Click on Connector.
4. Click on Virtual Disks.
The list of available virtual disks is displayed.
5. Click the Partition link for which you want to disable the cache.
The Partitions of Virtual Disk page is displayed with the list of available virtual disk partitions.
6. From the Tasks drop-down list, select Disable Fluid Cache.
7. Click Execute.
162