Software Support

Renaming A Virtual Disk
Does my controller support this feature? See Supported Features.
The Rename task enables you to change name of the virtual disk.
Related Links
Renaming A Virtual Disk
Canceling A Rebuild
Does my controller support this feature? See Supported Features.
Select the Cancel Rebuild task to cancel a rebuild that is in progress. If you cancel a rebuild, the virtual disk remains in a
Degraded state. The failure of an additional physical disk can cause the virtual disk to fail and may result in data loss. It
is recommended that you rebuild the failed physical disk as soon as possible.
NOTE: If you cancel the rebuild of a physical disk that is assigned as a hot spare, reinitiate the rebuild on the same
physical disk in order to restore the data. Canceling the rebuild of a physical disk and then assigning another
physical disk as a hot spare does not cause the newly assigned hot spare to rebuild the data. Reinitiate the rebuild
on the physical disk that was the original hot spare.
Changing The Virtual Disk Policy
Does my controller support this feature? See Supported Features.
The Change Policy task enables you to change the read, write, or cache policy of a virtual disk. Changes to the read,
write, and cache policy only apply to the virtual disk that you have selected. This task does not change the policy for all
virtual disks on the controller.
You can also modify the physical disk cache policy using this command.
Related Links
RAID Controller Read, Write, Cache, And Disk Cache Policy
Replacing A Member Disk
Does my controller support this feature? See Supported Features.
The Replace Member Disk task allows you to copy data from a physical disk, which is a member of a virtual disk, to
another physical disk by providing the Replace Member Configuration option. You can initiate multiple copies of data
from different array groups.
Related Links
Virtual Disk Task: Replace Member Disk (Step 1 of 2)
Virtual Disk Task: Replace Member Disk (Step 2 of 2)
Clearing Virtual Disk Bad Blocks
Does my controller support this feature? See Supported Features.
The Clear Virtual Disk Bad Blocks task enables you to clear bad blocks on your virtual disk. This feature is applicable
only to PERC H700, H710 Adapter, PERC H710 Mini Blades, PERC H710 Mini Monolithic, PERC H710P Adapter, PERC
H710P Mini Blades, PERC H710P Mini Monolithic, PERC H800, and PERC H810 Adapter family of controllers.
Encrypting A Virtual Disk
Does my controller support this feature? See Supported Features.
144