Software Support

To Locate Controller Task In Storage Management
1. In the Server Administrator window, under the system tree, expand Storage to display the controller objects.
2. Select a controller object on which you want to enable the revertible hot spare task.
3. Click Information/Configuration on the controller Properties page.
4. From the Controller Task drop-down list box, select Change Controller Properties and click Execute.
NOTE: The Rebuild rate for Revertible Hot Spare is the same as that defined for the controller.
Enabling Instant Encrypt Erase
Does my controller support this feature? See Supported Features.
CAUTION: Instant Encrypt Erase permanently erases all data present on the disk.
Select the Instant Encrypt Erase task to erase an encrypted physical disk. This task is available for:
• Unconfigured SED drive
• Foreign configured encrypted drives
• Unconfigured and foreign SED drive even when an Encryption Key is not present in the controller
Related Links
Managing The Encryption Key
To Locate Instant Encrypt Erase In Storage Management
To locate this task in storage management:
1. In the Server Administrator window, under the system tree, expand Storage to display the controller objects.
2. Expand a controller object.
3. Expand a connector object.
4. Expand the enclosure or backplane object.
5. Select the Physical Disk object.
6. Select Instant Encrypt Erase from the Tasks drop-down menu of the physical device you want to clear.
7. Click Execute.
Convert To RAID Capable Disk
This task enables a disk for all RAID operations.
This task is supported on H310 controllers.
Convert To Non-RAID Disk
This task converts a disk to a Non-RAID disk. After converting a disk to non- RAID, the disk is exposed to the operating
system unlike unconfigured good disks and it enables usage of disk in direct pass-through mode.
This task is supported on H310 controllers.
130