Software Support

Property Definition
Encryption Capable Displays whether the physical disk or device is a Self-Encryption Disk (SED).
The possible values are Yes and No.
Encrypted Displays whether the physical disk or device is encrypted to the controller.
The possible values are Yes and No. For a non-SED the value is N/A.
Bus Protocol Displays the technology that the physical disk or device is using. Possible
values are:
• SCSI
• SAS
• SATA
Media Displays the media type of the physical disk or device. The possible values
are:
• HDD — Hard Disk Drive. A HDD is a nonvolatile storage device
which stores digitally encoded data on rapidly rotating platters with
magnetic surfaces.
• SSD — Solid-State Drive. An SSD is a data storage device that uses
solid-state memory to store persistent data.
• Unknown — Storage Management is unable to determine the media
type of the physical disk or device.
Remaining Rated Write Endurance Displays information on the SSD renewal/replacement based on the amount
of write workloads. This field indicates the total remaining programs or
erase cycles available on the SSD, based on the cumulative specification of
the total NAND (Negated AND or NOT AND) Flash chips in the SSD.
Used RAID Disk Space Displays the physical disk or device space that is used by the virtual disks
on the controller. This property is Not Applicable for physical disks or
devices attached to non-RAID controllers.
In certain circumstances, the Used RAID Disk Space displays a value of
zero even though a portion of the physical disk or device is being used. This
occurs when the used space is 0.005GB or less. The algorithm for
calculating the used disk space rounds a figure of 0.005GB or less to 0. Used
disk space that is between 0.006GB and 0.009GB is rounded up to 0.01GB.
Available RAID Disk Space Displays the amount of available space on the disk. This property is Not
Applicable for physical disks attached to non-RAID controllers.
Hot Spare Indicates whether the disk has been assigned as a hot spare. This property
is Not Applicable for physical disks attached to non-RAID controllers.
Vendor ID Displays the hardware vendor of the disk.
Product ID Displays the product ID of the disk.
Revision Displays the revision number of the disk.
Serial No. Displays the serial number of the disk.
Part Number Displays the Piece Part Identification (PPID) of the physical drive.
124