Software Support

The available connectors are displayed. These connectors are numbered starting from zero.
3. Identify a connector that is not attached to storage. If the connector is already attached to storage, then the
connector object can be expanded to display an enclosure or backplane and the attached physical disks. A
connector object that cannot be expanded in the tree view is an open connector not currently attached to storage.
Storage Management displays a number for each connector. These numbers correspond to the connector numbers
on the controller hardware. You can use these numbers to identify which open connector displayed in the tree view
with the open connector on the controller hardware.
Enclosure Components
For information on attached components, see:
• Physical Disk Or Physical Device Properties
• EMM Properties
• Fan Properties
• Power Supply Properties
• Temperature Probe Properties And Tasks
106