Software Support

Changing The Asset Tag And Asset Name Of An Enclosure

To change the asset tag and asset name of the enclosure:

1. Type the new asset tag name in the New asset tag field.

You can specify an inventory number or other useful information for your environment. The asset tag typically

refers to the enclosure hardware.

2. Type the new asset name in the New asset name field.

You can specify a name useful to you for organizing your storage environment. For example, the asset name could

refer to the type of data stored on the enclosure or to the enclosure’s location.

3. Click Apply Changes.

To exit and cancel your changes, click Go Back To Enclosure Information Page.

Related Links

Setting Asset Data

To Locate Set Asset Data In Storage Management

To locate this task in storage management:

1. In the Server Administrator window, under the system tree, expand Storage to display the controller objects.

2. Expand a controller object.

3. Expand a connector object.

4. Select the Enclosure object.

5. Click Information/Configuration.

6. Select Set Asset Data from the Enclosure Tasks drop-down menu.

7. Click Execute.

Blinking The LED On The Enclosure

Does my enclosure support this feature? See Supported Features.

Select the Blink task to blink the LED on the enclosure. You may want to use this task to locate an enclosure. The LEDs

on the enclosure may display different colors and blinking patterns. For more information on what the blink colors and

patterns indicate, refer to the enclosure hardware documentation.

Setting The Temperature Probe Values

Does my enclosure support this feature? See Supported Features.

The temperature probes monitor the temperature of the enclosure. Each temperature probe has a warning and a failure

threshold. The warning threshold indicates that the enclosure is approaching an unacceptably warm or cool

temperature. You can modify the warning threshold.

The failure threshold indicates that the temperature of the enclosure has gone below the minimum threshold or

exceeded the maximum threshold which may cause data loss. You cannot change the default values for the failure

threshold.