SNMP Reference Guide

NOTE: Chassis identification capabilities allow system administrators to set front panel light-emitting diodes (LEDs)
to blink when the chassis has malfunctioning components. When enabled, the blinking lights help administrators
locate the problem chassis.
Table 182. Chassis Identification Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The chassis identification control’s state is
unknown..
enabled(2)
The chassis identification control’s state is disabled
(offline, a binary 0 value) or enabled (online, a
binary 1 value).
notReady(4)
The chassis identification control’s state is not
ready.
identifyChassis(
8)
The chassis identification control’s LEDs may be
returned to (normal) 0, or (identify chassis) 1.
identifyChassisA
ndEnable (10)
The chassis identification control’s LEDs may be
returned to normal (a binary 0 value), or identify
chassis and enabled (a binary 1 value).
Table 183. Host Control Capabilities
Variable Name : DellHostControlCapabilities
NOTE: An operator can manually enable these actions using SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualRebootCapa
ble(1)
The operator can reboot capable host.
manualPowerOFFCa
pable(2)
The operator can power off capable host.
manualPowerCycle
Capable(4)
The operator can power-cycle capable host.
manualAllExceptO
perating
SystemShutdownCa
pable(7)
The operator can reboot and power off capable
host.
manualOperatingS
ystemShut
downCapable(8)
The operator can shut down the operating-system–
shutdown capable host.
manualFullyCapab
le(15)
The operator can reboot, power on and off the
power-cycle capable host, and shut down the
operating-system–shutdown capable host.
manualRebootWith
OSShutdow
nCapable(16)
The operator can reboot with operating system
shutdown.
78