SNMP Reference Guide

iDRAC7 MIB

The Integrated Dell Remote Access Controller (iDRAC) MIB (filename iDRAC-SMIv1.mib/ iDRAC-SMIv2.mib) is the MIB

supported by the Integrated Dell Remote Access Controller 7 (iDRAC7). This MIB provides management data that allows

you to monitor devices and software on a system via an out-of-band connection to the iDRAC7 of a system.

NOTE: As of iDRAC7 firmware release r1.30.30 (which corresponds to the release of Dell OpenManage Server

Administrator Version 7.2), the iDRAC7 MIB file is published in both types of SMI (Structure of Managed

Information) notations: SMIv1 and SMIv2. The SMIv1 copy of the iDRAC7 MIB file is named iDRAC-SMIv1.mib. And

the SMIv2 copy is named iDRAC-SMIv2.mib. Prior to iDRAC7 firmware release r1.30.30, only a SMIv1 copy was

published. And the file name of the SMIv1 copy was iDRAC-MIB.txt

Supported Systems

The iDRAC7 MIB is supported on the following systems:

Blade Servers

• PowerEdge M420

• PowerEdge M520

• PowerEdge M620

• PowerEdge M820

Rack and Tower Servers

• PowerEdge R320

• PowerEdge R420

• PowerEdge R520

• PowerEdge R620

• PowerEdge R720

• PowerEdge R720XD

• PowerEdge R820

• PowerEdge T320

• PowerEdge T420

• PowerEdge T620

iDRAC7 Supported SNMP Versions

The following table identifies the SNMP version(s) that are supported by iDRAC7 for the given SNMP operations.

539