SNMP Reference Guide

drsCA2FQDD, drsProductChassisName, drsProductChassisLocation, drsChassisServiceTag and drsGlobalCurrStatus.
The trap variables are defined in the Dell Remote Access Controller Out-of-Band Group section.
System Trap Group
The System Trap Group contains traps that fall under the System event category.
Table 1926. Amperage Probe Traps
TrapID Description Category SubCategory Severity
alert2AmperageProbeNormal
2179 Current sensor reading is within
range.
Status Events Amperage Informational
alert2AmperageProbeWarning
2178 Current sensor has detected a
warning value.
Status Events Amperage Minor
alert2AmperageProbeFailure
2177 Current sensor has detected a
failure value.
Error Events Amperage Critical
Table 1927. Battery Traps
TrapID Description Category SubCategory Severity
alert2BatteryNormal
2227 Battery state has returned to
normal; or battery presence had
been detected.
Status Events Battery Informational
alert2BatteryWarning
2226 Battery is low. Status Events Battery Minor
alert2BatteryFailure
2225 Battery has failed or battery is
absent.
Error Events Battery Critical
Table 1928. Cable Traps
TrapID Description Category SubCategory Severity
alert2CableFailure
2393 Cable failure. Error Events Cable Critical
520