SNMP Reference Guide

TrapID Name Description Severity Category Cause Supporte
d by RAC
Platform
1017 alertDrscSEL
80 percentFull
The RAC system
event log is 80%
full
Major Status RAC detected system event
log is 80% full.
All
1018 alertDrscSEL
90 percentFull
The RAC system
event log is 90%
full
Major Status RAC detected system event
log is 90% full.
All
1018 alertDrscSEL
90 percentFull
The RAC system
event log is 90%
full
Major Status RAC detected system event
log is 90% full.
All
1020 alertDrscSEL
Normal
The RAC has
detected a new
event in the
System Event
Log with
Severity: Normal
Information Error RAC detected a new system
event log with normal
severity (detailed log info is in
drsAlert Message varbind).
All
PowerEdge M1000e CMC Traps
This section describes the traps that are generated by the SNMP agent of the PowerEdge M1000e CMC. All of the
enterprise-specific traps documented in this section belong to the MIB enterprise identified by OID 1.3.6.1.4.1.674.10892.2
and are sent with the following trap variables: drsProductChassisName, drsProductChassisLocation,
drsGlobalCurrStatus, drsCASubSystem, drsCASSCurrStatus, drsCASSPrevStatus, drsCASSChangeTime and
drsCAMessage. The trap variables are defined in the Dell Remote Access Controller Out-of-Band Group section.
Table 1925. PowerEdge M1000e CMC traps
TrapID Name Description Severity Category
2000 alertCMCTestTrap CMC has generated a test
trap.
Informational Error Events
2002 alertCMCNormalTrap CMC reported a return-to-
normal or informational
event.
Normal Error Events
2003 alertCMCWarningTrap CMC reported a warning
event.
Warning Error Events
2004 alertCMCCriticalTrap CMC reported a critical
event.
Critical Error Events
2005 alertCMCNonRecoverab
leTrap
CMC reported a
catastrophic event.
Non-Recoverable Error Events
PowerEdge VRTX CMC Traps
This section defines the traps that are generated by the SNMP agent of the PowerEdge VRTX CMC. All of the enterprise-
specific traps documented in this section belong to the MIB enterprise identified by OID 1.3.6.1.4.1.674.10892.2.21 and are
sent with the following trap variables: drsCA2MessageID, drsCA2Message, drsCA2MessageArgs, drsCA2AlertStatus,
519