SNMP Reference Guide

RAC Traps
This section describes the traps that are generated by the SNMP agent of the Remote Access Controller (RAC). All of the
enterprise-specific traps documented in this section belong to the MIB enterprise identified by OID 1.3.6.1.4.1.674.10892.2
and are sent with all of the trap variables documented in the section Traps . The trap variables are sent in the order in
which they are listed.
NOTE: The PowerEdge M1000e CMC and PowerEdge VRTX CMC do not generate the traps in this section. They
generate the traps documented in the CMC Traps.
Table 1924. RAC Traps
TrapID Name Description Severity Category Cause Supporte
d by RAC
Platform
0 CodeStart SNMP agent is
initializing itself
Information Status RAC power on or reset. All
1 Authenticatio
n
Failure Request
received with an
invalid
community
name
Critical Error SNMP request with an invalid
community name.
All
1001 alertDrscTest
TrapEvent
The RAC
generated a test
trap event in
response to a
user request
Information Status A test SNMP trap generated
by a RAC.
All
1002 alertDrscAuth
Error
RAC
Authentication
failures during a
time period have
exceeded a
threshold
Minor Error RAC login failure caused by
authentication failure,
number of concurrent logins
exceed limit, or permission
denied.
All
1015 alertDrscSEL Warning The
RAC has
detected a new
event in the
System Event
Log with
Severity:
Warning
Major Error RAC detected a new system
event log with warning
severity (detailed log info is in
drsAlert Message varbind).
All
1016 alertDrscSEL Critical The RAC
has detected a
new event in the
System Event
Log with
Severity: Critical
Critical Error RAC detected a new system
event log with critical
severity (detailed log info is in
drsAlert Message varbind).
All
518