SNMP Reference Guide

21
Baseboard Management Controller Group
The Baseboard Management Controller (BMC) monitors the system for critical events by communicating with various
sensors on the system board and sends alerts and log events when certain parameters exceed their preset thresholds.
The BMC Group provides information about the BMC that may be present in your system. In addition to providing general
information about the BMC, this group provides information about the serial and local area network (LAN) interfaces of
the BMC.
Baseboard Management Controller Group Tables
The objects in the BMC group define information about the BMC and the serial and LAN interfaces that can be used to
access the BMC remotely to perform management activities. Objects for the serial interface define the serial connection
mode, flow control type and bit rate. Objects for the LAN interface define the media access control (MAC) address,
internet protocol (IP) address, subnet mask and default gateway.
The following MIB tables define the BMC group:
• Baseboard Management Controller Table
• Baseboard Management Controller Serial Interface Table
• Baseboard Management Controller LAN Interface Table
Baseboard Management Controller Table
Table 1300. BMC Table
Name
bmcTable
Object ID 1.3.6.1.4.1.674.10892.1.1900.10
Description Defines the Baseboard Management Controller Table.
Syntax SEQUENCE OF BmcTableEntry
Access Not accessible
Table 1301. BMC Table Entry
Name
bmcTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1900.10.1
Description Defines the Baseboard Management Controller (BMC) Table Entry.
Syntax BmcTableEntry
Access Not accessible
Index
bmcChassisIndex
369