SNMP Reference Guide

Access Read-only
Table 11. UUID Index
Name
uUIDIndex
Object ID 1.3.6.1.4.1.674.10892.1.300.20.1.2
Description Defines the index of the UUID in a specified chassis.
Syntax DellObjectRange
Access Read-only
Table 12. UUID Type
Name
uUIDType
Object ID 1.3.6.1.4.1.674.10892.1.300.20.1.3
Description Defines the type of the UUID for this chassis.
Syntax DellUUIDType
Access Read-only
Table 13. UUID Value
Name
uUIDValue
Object ID 1.3.6.1.4.1.674.10892.1.300.20.1.4
Description Defines the value of the UUID for this chassis.
Syntax Octet String (SIZE[16])
Access Read-only Read-only
Section Organization
Sections in this reference guide are based on the Server Administrator MIBs, so the complexity of each section depends
on the complexity of each MIB group. The first section provides a high-level introduction to the MIB group. If the group
is defined by one or more tables, the second section lists these tables. The third section documents the variables that
comprise the group, and if applicable, the variables that comprise the tables. The fourth section contains definitions for
any Server Administrator-specific variables that are used in the section. The following example shows the typical
content of these four sections:
1. BIOS Setup Control Group — This section explains the purpose of the MIB group and summarizes the major
features of the component groups.
2. BIOS Group Tables — If there is more than one SNMP table for a group, this section lists all of the tables. For this
BIOS group example, there are eight tables listed. In each section, double-clicking any table on the list takes you to
that table.
– BIOS Setup Control Table
– SCSI Control Table
– Parallel Port Control Table
– Serial Port Control Table
18