SNMP Reference Guide

canceled(8)
The remote flash BIOS has been canceled.
pending(16)
The remote flash BIOS update is pending.
other(32)
The remote flash BIOS state/setting is not one of the
previous values.
Table 501. Remote Flash BIOS Completion Code
Variable Name: DellRemoteFlashBIOSCompletionCode
Data Type: Integer
Possible Data Values Meaning of Data Value
completionCodeIsOther(1)
The completion code status is not one of the following:
completionCodeIsUnknown(2)
The completion code is unknown (not known or not
monitored).
completionCodeIsOK(3)
This completion code completed successfully.
completionCodeIsBadImage(4)
This completion code is a bad flash BIOS image.
completionCodeIsNoFileAccess(5)
Flash BIOS could not be accessed.
completionCodeIsNotReady(6)
Flash BIOS memory not ready.
completionCodeIsDisabled(7)
Flash BIOS is currently disabled.
completionCodeIsNoBattery(8)
A battery must be installed.
completionCodeIsNoChargedBattery(9)
A fully charged battery must be installed.
completionCodeIsNoExternalPower(10)
An external power adapter must be connected.
completionCodeIsNo12VoltSet(11)
12 volts (V) could not be set.
completionCodeIsNo12VoltRemoval(12)
12 V could not be removed.
completionCodeIsFlashMemoryFailed (13)
A flash memory failure occurred.
completionCodeIsGeneralFailure(14)
A general failure occurred.
completionCodeIsDataMiscompare(15)
A data miscompare error occurred.
completionCodeIsNoImageFound(16)
The flash BIOS image could not be found in memory.
completionCodeIsNoUpdatePerformed (17)
No update operation has been performed.
156