Reference Guide

Table 39. Enabling User Access For Administrators, Power Users, And Users
Command Result Description
omconfig preferences useraccess
enable=user
Grants Server Administrator access to
Users, Power Users, and
Administrators.
Least restrictive form of user access.
omconfig preferences useraccess
enable=poweruser
Grants Server Administrator access to
Power Users and Administrators.
Excludes user level access only.
omconfig preferences useraccess
enable=admin
Grants Server Administrator access to
Administrators only .
Most restrictive form of user access.
Omconfig Preferences Webserver
Use the omconfig preferences webserver command to set the encryption levels of the Server Administrator Web server
and configure the URL launch point in the Server Administrator Web server environment.
The following table displays the name=value pairs you can use with this command:
Table 40. Valid Parameters Of Omconfig Preferences Webserver
name=value pair 1 name=value pair 2 Description
attribute=sslencryption setting=autonegotiate | 128bitorhigher
autonegotiate: Sets the encryption
levels automatically based on your
Web browser settings.
128bitorhigher: Sets the encryption
levels to 128-bit or higher.
attribute=seturl host=< string > port=< value > Enables you to configure the URL
launch point in the Server
Administrator Web server
environment.
attribute=signalgorithm algorithm=MD5 | SHA1 | SHA256 |
SHA512
MD5: Sets the key signing algorithm to
MD5.
SHA1: Sets the key signing algorithm
to SHA1.
SHA256: Sets the key signing
algorithm to SHA256.
SHA512: Sets the key signing
algorithm to SHA512.
For example, to set the URL launch point use the following command:
omconfig preferences webserver attribute=seturl host=<name>, ip, fqdn>
port=<
number>
The host input must contain a valid IPv4 or IPv6 address, or a valid hostname.
To set the signing algorithm value, use the following command:
omconfig preferences webserver attribute=signalgorithm algorithm=MD5
96