Reference Guide

name=value pair 1
config=
name=value pair 2 Description
user: Sets the maximum privilege level that are
accepted on a serial over LAN channel, to User.
config=settodefault Takes the default configuration settings.
config=terminalmode deletecontrol=outputdel |
outputbkspspbksp
utputdel: BMC outputs a <del> character when
<bksp> or <del> is received.
outputbkspspbksp: BMC outputs a <bksp><sp><bksp>
character when <bksp> or <del> is received.
handshakingcontrol=enabled |
disabled
enabled: Directs the BMC to output a character
sequence that indicates when its input buffer is ready
to accept another command.
disabled: Does not direct the BMC to output a
character sequence that indicates when its input
buffer is ready to accept another command.
inputlinesequence=cr | null
cr: The console uses <CR> as a new line sequence.
null: The console uses <NULL> as a new line
sequence.
lineediting=enabled | disabled
enabled: Enables line editing as a line is typed.
disabled: Disables line editing as a line is typed.
newlinesequence=none| crlf | null |
cr | lfcr | lf
none: BMC does not use a termination sequence.
crlf: BMC uses <CR-LF> as a new line sequence when
the BMC writes a new line to the console.
null: BMC uses <Null> as a new line sequence when
the BMC writes a new line to the console.
cr: BMC uses <CR> as a new line sequence when the
BMC writes a new line to the console.
lfcr: BMC uses <LF-CR> as a new line sequence when
the BMC writes a new line to the console.
lf: BMC uses <LF> as a new line sequence when the
BMC writes a new line to the console.
config=user id=number enable=true | false
id=number: ID (in numeric format) of the user being
configured.
enable=true: Enables the user.
enable=false: Disables the user.
id=number enableserialoverlan=true |
false
id=number: ID (in numeric format) of the user being
configured.
enableserialoverlan=true: Enables serial over LAN.
enableserialoverlan=false: Disables serial over LAN.
NOTE: The enableserialoverlan option is
supported only on PowerEdge 9G systems.
id=number name=text
id=number: ID (in numeric format) of the user being
configured.
name=text: Name of the user.
id=number newpw=text
confirmnewpw=text
id=number: ID (in numeric format) of the user being
configured.
newpw=text: New password of the user.
confirmnewpw=text: Confirm the new password.
89