Reference Guide

name=value pair 1
config=
name=value pair 2 Description
directterminal: Type of messaging that uses printable
ASCII characters and allows a limited number of text
commands over a serial connection.
directbasicterminal: Both basic and terminal mode
messaging over a serial connection.
modembasic: Type of messaging used for IPMI
messaging over a modem.
modemterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a modem.
modembasicterminal: Both basic and terminal
messaging over a modem.
NOTE: All commands may not be supported on
the system.
privilegelevel=administrator |
operator | user
administrator: Sets the maximum privilege level that
are accepted on a serial connection, to Administrator.
operator: Sets the maximum privilege level that are
accepted on a serial connection, to Operator.
user: Sets the maximum privilege level that are
accepted on a serial connection, to User.
config=serialoverlan enable=true | false
true: Enables serial over LAN for the BMC.
false: Disables serial over LAN for the BMC.
baudrate=9600 | 19200 | 38400 | 57600
| 115200
9600: Sets the volatile and nonvolatile connection
speed to 9600 bits per second.
19200: Sets the volatile and non-volatile connection
speed to 19200 bits per second.
NOTE: Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850, 2800, and
2850 systems.
38400: Sets the volatile and non-volatile connection
speed to 38400 bits per second.
57600: Sets the volatile and non-volatile connection
speed to 57600 bits per second.
NOTE: Baud rates of 19200, and 57600 are
supported on PowerEdge 9G systems.
115200: Sets the volatile and non-volatile connection
speed to 115200 bits per second.
NOTE: Baud rate of 115200 is supported on
certain systems that have a DRAC 5 installed.
NOTE: Baud rate of 19200, 57600, and 115200 are
supported on 10G systems that have iDRAC
installed.
privilegelevel=administrator |
operator | user
administrator: Sets the maximum privilege level that
are accepted on a serial over LAN channel, to
Administrator.
operator: Sets the maximum privilege level that are
accepted on a serial over LAN channel, to Operator.
88