Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• enablednonepxe: Enables the third
NIC during system boot (with PXE
off if the system has PXE).
• enabledwithiscsi: Enables the
third NIC during system boot (with
iSCSI on if the system has iSCSI).
attribute=nic4 setting=enabled | enabledwithpxe |
disabled | enabledonly |
enablednonepxe | enabledwithiscsi
• enabled: Enables the fourth NIC
during system boot.
• enabledwithpxe: Enables the
fourth NIC during system boot
(with PXE on if the system has
PXE).
• disabled: Disables the fourth NIC
during system boot.
• enabledonly: Enables the fourth
NIC during system boot (with PXE
off if the system has PXE).
• enablednonepxe: Enables the
fourth NIC during system boot
(with PXE off if the system has
PXE).
• enabledwithiscsi: Enables the
fourth NIC during system boot
(with iSCSI on if the system has
iSCSI).
attribute=numlock setting=on | off
• on: Uses the keypad as number
keys.
• off: Uses the keypad as arrow
keys.
attribute=NodeInterleave
NOTE: Use NodeInterleave
instead of numa as numa will
be deprecated in future
releases.
setting=enabled | disabled
• enabled: Enables Node
Interleaving and disables Non-
Uniform Memory Access.
• disabled: Disables Node
Interleaving and enables Non-
Uniform Memory Access.
attribute=ppaddress setting=off | lpt1 | lpt2 | lpt3
• off: Disables the parallel port
address.
• lpt1: Locates the device on LPT1.
• lpt2: Locates the device on LPT2.
• lpt3: Locates the device on LPT3.
attribute=ppmode setting=at | ps2 | ecp | epp
• at: Sets the parallel port mode to
AT.
• ps2: Sets the parallel port mode to
PS/2.
• ecp: Sets the parallel port mode to
ECP (extended capabilities port).
67