Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• auto: Sets the embedded SATA
port value to auto.
attribute=extserial setting=com1 | com2 | rad
• com1: Maps the external serial
connector to COM 1.
• com2: Maps the external serial
connector to COM 2.
• rad: Maps the external serial
connector to the remote access
device.
attribute=fbr setting=9600 | 19200 | 57600 | 115200
• 9600: Sets the console redirection
failsafe baud rate to 9600 bits per
second.
• 19200: Sets the console
redirection failsafe baud rate to
19200 bits per second.
• 57600: Sets the console
redirection failsafe baud rate to
57600 bits per second.
• 115200: Sets the console
redirection failsafe baud rate to
115200 bits per second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe filter
chipset option.
• disabled: Disables the probe filter
chipset option.
NOTE: Certain applications do
not function fully if you enable or
disable this option.
attribute=ide setting=on | off force=true
• on: Enables IDE.
• off: Disables IDE.
• force=true: Verification of setting
change.
attribute=idepridrv setting=off | auto
• off: Disables the device.
• auto: Detects and enables the
device automatically.
attribute=intrusion setting=enabled | disabled
• enabled: Enables the intrusion
check during system boot. If the
system also has bezel intrusion
checking, then the intrusion option
checks for removal of the bezel of
the system.
• disabled: Disables the intrusion
check during system boot.
attribute=intusb[1..2]
setting=enabled | disabled
• enabled: Enables the internal USB
port.
65