Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
Makes the diskette drive read-
only.
attribute=dualnic setting=off | on | pxeboth | nic1pxe |
nic2pxe | isciboth | nic1isci | nic2isci |
nic1pxenic2isci | nic1iscinic2pxe |
onpxeboth | onpxenone | onpxenic1 |
onpxenic2
• off: Disables the Network
Interface Controllers (NICs).
• on: Enables the network interface
(PXE or iSCSI is not enabled on
either of the NICs).
• pxeboth: Enables PXE on both
NICs.
• nic1pxe: Enables PXE on the first
NIC and none (no PXE or iSCSI) on
the second NIC.
• nic2pxe: Enables none (no PXE or
iSCSI) on first NIC and PXE on the
second NIC.
• isciboth: Enables iSCSI on both the
NICs.
• nic1isci: Enables iSCSI on the first
NIC and none (no PXE or iSCSI) on
the second NIC.
• nic2isci: Enables none (no PXE or
iSCSI) on the first NIC and iSCSI
on the second NIC.
• nic1pxenic2isci: Enables PXE on
the first NIC and iSCSI on second
NIC.
• nic1iscinic2pxe: Enables iSCSI on
the first NIC and PXE on second
NIC.
The following options are deprecated:
• onpxeboth: Enables PXE on both
the NICs.
• onpxenone: PXE is not enabled on
either of the NICs.
• onpxenic1: Enables PXE on NIC 1.
• onpxenic2: Enables PXE on NIC 2.
attribute=embhypvisor setting=enabled | disabled
• enabled: Enables the embedded
hypervisor.
• disabled: Disables the embedded
hypervisor.
attribute=embvideoctrl setting=enabled | disabled
• enabled: Enables the embedded
video controller as the primary
video device.
• disabled: Disables the embedded
video controller as the primary
video device.
attribute=esataport setting=off | auto
• off: Sets the embedded SATA port
value to off.
64